Showing posts with label Shaping of spur and helical gears. Show all posts
Showing posts with label Shaping of spur and helical gears. Show all posts

Wednesday, February 27, 2008

Shaping of spur and helical gears


Shaping is a gear cutting process where the cutting tool is in the form of a spur/helical gear. The gear teeth are relieved to form cutting edges. The cutting tool and the gear blank mesh on parallel axes as if they are two completed gears in pairs with tool gear having zo teeth and the work piece having z teeth. It means if the tool rotates at n’o rpm, the work piece is made to rotate at n’ rpm, such that –

n' = n’o X zo/z
The tool is fed downward at a feed rate f which is dependent on the material being cut (assuming a vertical configuration of the shaping machine). During the downward stroke, cutting takes place. On the upward stroke, the tool disengages from the job. This disengagement may take place with the table moving out of position. On some newer machines nowadays, the whole spindle assembly moves out of disengagement from the work piece. Up-down axial motion of the tool is normally with crank or lever arrangement. From these basic motions (Fig. 8), it will be seen that shaping is an intermittent generating process as compared with hobbing which is a continuous generating process.